|
 |
i1 Basic Brochure |
|
i1 Comparison Chart |
The Eye-One Base or Basic
Affordable, Professional Spectral Color Measurement!
Designed for the unique needs of creative and prepress professionals, is ideal for all your basic color measurement needs. Simply add functionality as required. Including the industry standard i1Pro spectrophotometer and i1Match monitor profiling software, i1Basic is the one system comprehensive enough to ensure accurate color every time.
i1Basic includes the defacto industry standard i1Pro spectrophotometer and i1Match Monitor profiling software. With i1Basic, you'll be able to scan spectral color, obtain accurate color on all your displays, utilize your device to linearize your printers, and easily add profiling functionality through upgrade modules. With the included i1Share software you'll also be able to measure spot colors, plus capture both flash and ambient light. i1Pro is supported by all major RIP manufacturers.
- Profile CRT, LCD and Laptop displays in Easy or Advanced Mode
- Create profiles for any ambient light condition, allowing for optimal viewing of color critical work
- Use reference profiles to match all monitors in your workgroup
- Select from unlimited gamma white point and luminance settings
- Validate and trend monitor performance
- Optimize gray balance for more neutral and better defined grays
- Includes interactive i1Defined training in the box
Easy Upgrades for i1Basic
Simply add any of these i1Match modules (through a purchased access code) to increase the functionality of your i1Basic solution:
- RGB & CMYK Output
- Scanner
- Digital Projector
- Digital Camera
- i1Editor
If you depend on accurate color, i1Basic is the perfect system to get you working effectively in a properly color managed ecosystem.
i1iO Automated Scanning Table
When your needs grow towards high volume output profiling, the i1iO automated hands-free chart reader is a must have accessory! Simply dock your i1Pro device into the iO table to measure any substrate up to 10 mm thick!
*i1Basic is available in either NoFilter and UVcut. Purchase according to your workflow requirements.
At a Glance:
Monitor Profiling
LCD, CRT & Laptop
Professional Monitor Profiling
Ability to Capture Flash and Ambient Light
Printer Profiling
Available through upgrade purchase
Scanner Profiling
Available through upgrade purchase
Camera Profiling
Available through upgrade purchase
Projector Profiling
Available through upgrade purchase
The X-Rite Eye-One Base Features and Benefits:
New to color management? The i1 Base is the perfect entry-level system for profiling monitors only. You'll get the right color on your screen without spending a fortune or hours tweaking color in Photoshop®!
The Eye-One Base is an affordable solution designed specifically for those just starting out in color management. And as your needs expand, the Eye-One Base can grow with you. When you're ready to tackle more critical color issues like proofing or high end photographic printing, upgrade to our advanced RGB or CMYK printer profiling modules. You can also easily add digital camera profiling, scanner profiling, digital projector profiling and profile editing as your needs expand.
Out of the box, the i1 Base can calibrate and profile LCD or CRT monitors and laptops, and has the ability to capture flash and ambient light.
i1Basic Specifications:
Spectral measurement device & Measurement modes
- Reflectance single measurement
- Reflectance scanning measurement with automatic patch detection
- Emission: radiance measurement (monitor measurement)
- Emission: irradiance measurement (light measurement)
Spectral analyzer: Holographic diffraction grating with 128 pixel diode array
Optical resolution: 10nm
Physical sampling interval: 3.5nm
Spectral data: Range: 380 ... 730 nm in 10nm steps
Measurement aperture: 4.5mm diameter
Interface: USB 1.1
Physical dimensions: Length 151mm, width 66mm, height 67mm (6 x 2.6 x 2.6 inches)
Weight: 185g (6.5oz)
Accessories included: Calibration plate, USB cable, monitor holder, positioning target, scanning ruler, and light measurement head
Measurement geometry: 45°/0° ring illumination optics, DIN 5033
Light source: Gas filled tungsten (Type A) No or UV cut (Filters not exchangeable)
Inter-instrument agreement: Average DE*94 0.4, max. DE*94 1.0 (Deviation from X-Rite manufacturing standard at 23°C for single measurement mode on 12 BCRA tiles (D50,2°)
Short-term repeatability: DE*94 <= 0.1 (D50,2°), with respect to the mean CIELab value of 10 measurements every 3 seconds on white
Data format: Spectral radiance (mW/nm/m2 /sr); Luminance Y (cd/m2)
Measurement range: 0.2 ... 300 cd/m2
Short-term repeatability: x,y: +/- 0.002 typical (CRT 5000°K, 80 cd/m2)
Type: Cosine-corrected diffuse light measurement head
Diameter: 6.0 mm
Data format: Spectral irradiance (mw/nm/m2), Illuminance Y (lux)
Power supply: Device powered by USB. USB 1.1 high power device.
i1 Ruler: 33.5 cm x 17 cm
i1 Ruler Board: 35.5 cm X 26.5 cm folded, 35.5 cm X 40 cm unfolded
i1 software System Requirements
Macintosh®
- Power Mac G3 or higher, 300 MHz
- Mac OS X 10.3 or later
- 128 MB of available RAM
- 100 MB of available hard disk space
- USB support
Windows®
- PC with 300MHz
- Windows 2000, XP, Vista
- 128 MB of available RAM
- 100 MB of available hard disk space
- USB Support
Power Conditions
- Powered by USB, no additional charger required: USB 1.1 high power device
|
